C/S Pedismart

C/S PediSmart^TM SPECIFICATION

Part 1 - General

1.01    Summary

A. This section includes the following type of C/S Entrance Flooring systems:

      choose from the following:

1.   C/S PediSmart Entrance mat – recessed - with base frame assembly.

2.   C/S PediSmart Entrance mat - surface mounted with taper frame assembly.

1.02    Submittals

       General : Submit in accordance with conditions of contract.

1.03    Quality Assurance and Applicable Certification

A.   Flammability in accordance with ASTM E648, Class 1, Critical Radiant Flux, minimum 0.45 watts/cm.

B.   Standard rolling load performance is 250 kg/wheel with larger loading requirements as specified. (Load applied on a single wheel). [Specifier note: For entranceways such as airports and retail malls, rolling load performance is a critical factor not only for goods trolleys but also for interior cleaning equipment].

C.   Single Source Responsibility: Obtain floor mat system and frames from a single source manufacturer.

1.04    Delivery, Storage and Handling

A.   Delivery materials to the customer ready for use and fabricated in as large sections and assemblies as practical, in unopened original factory packaging clearly labeled to identify manufacturer.

1.05    Project Conditions

A.   Field measurements: Check actual openings for mats by accurate field measurements prior to fabrication. Record actual measurements on final shop

B.   drawings. Coordinate fabrication schedule with construction progress to avoid delay of work.

C.   For recess application, coordinate frame installation with concrete construction to ensure recess and frame anchorage is accurate and that the base is level and flat. Defer frame installation until building enclosure is complete and related interior finish work in progress.

D.   It is recommended that splices in wider units (above 3600 mm) not be positioned in the middle of a door opening, wherever possible.

E.   Insert mat requirements:

Quantity      Width (mm)          Length - Tread (pedestrian flow) direction (mm)

    1.      Big C - Da nang

Part 2 - Products

2.01    Manufacturers

A.   Drawings and specifications to be based on the manufacturer’s information as produced by Construction Specialties, Inc. Middle East office located at:

          Construction Specialties Middle East L.L.C

          1705 Dubai World Trade Centre

          P.O. Box 9260, Dubai - UAE

          Tel: +971 4 3312167

          Fax: +971 4 3315023

          email: www.c_sgroup.com

Unless otherwise indicated, other manufacturers must comply with the minimum levels of material and detailing indicated on the drawings and specified herein.

2.02    Materials

A.   Aluminum – ASTB 221, alloy 6063-T5, for extrusions.

B.   Plasticised PVC with a relative density of between 1.28 and 1.51 together with shore hardness values between 86 to 88.

C.   Vinyl/Acrylic – High impact PVC extrusions

D.   Tread inserts – refer to section 2.05

2.03    Preparation

A.   For recessed applications, the surface beneath the mat shall be finished with a leveling screed to ensure optimum performance of the system.

2.04    General Description

The PediSmart Entrance Mat shall be extruded from 6063-T5 aluminum alloy “low profile” tread rails pitched at a maximum of 50mm centers and connected by a continuous mono durometer PVC combination hinge and cushion extrusion (connector spline). The connector splines shall be slotted to provide a 25 mm (slot) 12.5 mm (solid) perforation pattern, between each tread rail, for drainage, unless otherwise specified. Solid or unperforated systems that do not allow for dirt and water retention within the mat area shall not be acceptable. Tread Rails, Frames, Connector Splines, Inserts and Edge Fillers to be to selected finish and color. To facilitate easy removal for cleaning, single mat widths shall not exceed 3600 mm. Larger sizes shall be supplied as multiple units.

2.05     Carpet Tread Inserts (where applicable)

Carpet Tread inserts shall be replaceable and available in a minimum color range of 25 standard colors (see back cover for details).

(Specifier/Customer to insert name and color code)

Carpet inserts shall be available in: (Specifier/Customer to select one of the following)

Spec Code.            Type

IES -                Exterior (recommended for Heavy traffic >500 people/day) -

Shall be solution dyed construction of polypropylene fibers with 50/50 blend of 600/12-denier multifilament and 595/D1 monofilament, available in one of three standard colors as offered by manufacturer. The textured fibers have ultra-violet

blockers and color as an integral part of the filament. Each

carpet fiber and monofilament shall be fusion bonded to a rigid two-ply backing to prevent fraying and supplied in continuous splice-free lengths. Waterproof fibers do not get soggy, rot, fade or stain. Carpet weight shall be 758 gram/m²..

All Carpet Tread internal inserts to have a minimum static coefficient of friction (slip resistance) of 0.60 when tested to ASTM D-2047-96.

2.06    Serrated Aluminium Inserts (where applicable)

Serrated Aluminium inserts (Spec. code ISA) shall be supplied in extruded aluminum to grade 6063-T5 complete with a sure grip serration pattern, all in mill finish.

2.07    Frame Assemblies

2.7.1 Surface Mounted:

Frames shall be of the Aluminum Block-Out Frame type for recessed mounted application and shall 18.4mm deep recessed frame in 6063-T5 aluminum alloy (optional in architectural bronze) with 6.4mm wide exposed surface. Colored Edge filler shall be furnished as required when standard 50 mm tread spacing cannot be maintained.

2.7.2   Recessed Mounted:

Frames shall be of Surface Mounted type for surface mounted application and shall 11 mm deep recessed frame in 6063-T5 aluminum alloy with 6.4mm wide exposed surface. Colored Edge filler shall be furnished as required when standard 50 mm tread spacing cannot be maintained.

2.08    Warranty

The manufacturer shall offer a detailed warranty policy for a minimum period of one year from the date of supply.

C/S PEDISMART ENTRANCE CARPET PROJECT LIST IN VIETNAM.

     2.      Gemadept office building – district 1, HCMC.

     3.      Unilever office – district 7, HCMC.

     4.      Villa Le Quang dinh – district Go Vap, HCMC.

     5.      ACB Bank –318 Le Van Sy street, district Phu Nhuan, HCMC.

     6.      ACB Bank –2/19 Cao Thang street, district 3, HCMC.
   7.      ACB Bank – 455 To Hien Thanh street, district 10, HCMC.
     8.      Nguyen Thi Dieu building – 39 Nguyen Thi Dieu street, district 3, HCMC.
     9.      ACB Bank Vinh Long.
   10.     FV Hospital - district 7, HCMC.
   11.     ACB Bank –Nguyen Thi Dinh street, district 2, HCMC.
   12.      ACB Bank Cong Hoa- district Tan Binh, HCMC.
   13.      British Council – Ha Noi.
   14.      Megastar cinema – Hung Vuong Plaza, district 5, HCMC.
   15.       Megastar cinema – 191 Ba trieu street, vincom tower, HN.
   16.       Centre point office building – 156 nguyen van troi street, Phu Nhuan district, HCMC.
   17.       Citybank – Nguyen Hue street, District 1, HCMC.

   18.       Toyota Can tho – Can Tho City.

   19.       Nhà Villa - district 2, HCMC.

    20.       Fideco Tower, 15F – Ham Nghi street, District 1, HCMC.

    21.       Hanesrand & Warehouse II – Phu Bai Town, Hue Province.

    22.       Hanesrand & Warehouse I – Phu Bai Town, Hue Province.

    23.       Happy Hospital – Binh Duong Province.